By A Mystery Man Writer
Unisteer’s rack and pinion kit uses a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley on your water pump is required for this kit.
Unisteer’s rack and pinion kit uses a traditional style rear steer rack & pinion that is mounted to a one piece bracket which bolts up to the outside of either frame rail in the same holes as the original steering box and idler arms.
This kit is for rear wheel drive vehicles only, NOT 4x4s. Installs have been done on V-8s, so there should be room if using a 6 Cylinder. There is quite a bit of room for the shaft support, but some headers may require modification. A two groove pulley on your water pump is required for this kit.
Ecklers Steering Column, N/T, Col Shift, Reman, 79-84
Chevy/GMC Trucks 1973-1987: How to Build & Modify
73-87 Chevy GMC C10 Truck CalTrac Traction Bars
Ecklers 1963-1987 Chevy-GMC Truck KYB Excel-G Shock Absorber
Chevrolet / GMC 3100 Pickup 1947-1954 Total Cost Involved Grounded Chassis - Switch Suspension
Ecklers Tubeless 2.91 Rubber Valve Stem
FR30106BK - 1973-87 GMC Truck Column Shift Tilt Column - Black Powdercoat Finish
1973-1987 Chevy-GMC Truck Power Rack And Pinion Steering Kit
Gearboxes, Rack & Pinions for GMC Truck for sale
C10 Pro Touring Chassis, 63-87 Chevy Pro Touring Chassis
Ecklers U-Joint,Rack & Pinion Steering,Lower,55-57
Flaming River 1973-1987 Chevy C10 Power Rack and Pinion Cradle Kit, Without Steering Column, Chevrolet, C10 Pickup, C15 Truck